Product description
This is a replica of a late medieval / Renaissance cuirass, as worn in the 16th century by landsknechts, late knights, and armored infantry. It features rope-like edges, which is a typical characteristic of this period. It consists of a breastplate and a backplate. The cuirass is made from approximately 1.6 mm steel, making it suitable to a limited extent for combat reenactment. The interior of the armor is blackened for better corrosion resistance, and it has rounded edges at the neckline, armholes, and bottom rim. The two halves of the torso armor are fitted around the body and secured in place with adjustable leather straps and buckles, which are firmly riveted at shoulder height and at the sides of the backplate.
Details:
Material: 1.6 mm (16 gauge) steel, leather straps, antiqued brass buckles
Overall length: approx. 43 cm (measured from the highest shoulder point down to the bottom edge)
Chest circumference: from approx. 120 cm (for a tight fit) up to max. 135 cm
Neck opening (diameter): approx. 18 cm
Weight: approx. 4.5 kg
Based on a historical original
Shipment weight (g): 5000 *
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
Maintenance & care
Prevent rust and corrosion by oiling your armour regularly. Remove rust easily with black sandpaper.
Tip: How to adjust the finish of your armour and weaponry
Luxurious (polished)- polish the steel with metal polish or toothpaste. You can even give the item a mirror-like polish. Test on a small surface first!
Handmade (matte)- soak the steel in cola for 40 minutes to 20 hours. Check regularly and treat with black sandpaper.
Antique (patinated) leave the steel to rust for some time in a damp environment, preferably outside. Remove the red layer of rust, to reveal the corroded top layer.
Please note. After finishing the product yourself, the warranty and return right expire. Celtic WebMerchant is not responsible for the obtained result."
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.
Read here about how we are committed to sustainability.
