Product description
The Barbute helmet or barbute is an Italian development of the sallet. Barbutes were often made in Northern Italy, but they were worn all over 15th century Europe. Northern Italian armor manufacturers made large quantities of the barbute in this century. This barbute is based on an original from the Wallace Collection in London.
Details:
Max. head circumference: 62 cm
Material: Carbon steel
Thickness: 1,2 mm
Helmet has a helmet inlay
Based on a historical original
Shipment weight (g): 3000 *
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
Maintenance & care
Prevent rust and corrosion by oiling your armour regularly. Remove rust easily with black sandpaper.
Choosing the size that fits you best
Add 3,5 cm to your head circumference if you wear an arming cap under your helmet.
Add 2,5 cm to your head circumference if you wear a chainmail coif under your helmet.
Add 6 cm to your head circumference if you wear both an arming cap and a chainmail coif under your helmet.
Tip: How to adjust the finish of your armour and weaponry
Luxurious (polished)- polish the steel with metal polish or toothpaste. You can even give the item a mirror-like polish. Test on a small surface first!
Handmade (matte)- soak the steel in cola for 40 minutes to 20 hours. Check regularly and treat with black sandpaper.
Antique (patinated) leave the steel to rust for some time in a damp environment, preferably outside. Remove the red layer of rust, to reveal the corroded top layer.
Please note. After finishing the product yourself, the warranty and return right expire. Celtic WebMerchant is not responsible for the obtained result."
Packaged with 100% recycled material
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.
