Product description
This is a replica of an Italic galea which is found in the Balkan. The original was presumably worn between 150 and 250 AD.
The reproduction is made of steel and decorated with brass. The helmet has a broad eyebrow- and shoulderplate which is typical for Roman helmets from this period.
It is delivered including a cotton arming cap and is suitable for a head circumference up to 60 cm. It weighs approx. 2 kg.
Product details:
Length (front to back): 21.5 cm
Width (ear to ear): 19.5 cm
Max. head circumference: 60 cm
Material: carbon steel
Thickness: 1.3 mm
Inlay: arming cap
Weight: 2.6 kg
Based on a historical original: yes
Transport weight (gram): 3000 *
Maintenance & care
Prevent rust and corrosion by oiling your armour regularly. Remove rust easily with black sandpaper.
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
Tip: How to adjust the finish of your armour and weaponry
Luxurious (polished)- polish the steel with metal polish or toothpaste. You can even give the item a mirror-like polish. Test on a small surface first!
Handmade (matte)- soak the steel in cola for 40 minutes to 20 hours. Check regularly and treat with black sandpaper.
Antique (patinated) leave the steel to rust for some time in a damp environment, preferably outside. Remove the red layer of rust, to reveal the corroded top layer.
Please note. After finishing the product yourself, the warranty and return right expire. Celtic WebMerchant is not responsible for the obtained result.
Packaged with 100% recycled material
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.
