Product description
This hand and a half sword is based on the earlier models of hand and a half sword such as the Oakeshott type XIIa. Swords of this type were already used in the early 14th century. One original was used by the Knights Templar and has been found in the Thames in London near Temple Church. This battle-ready sword is suitable for light sword fights.
Details:
Material: EN45 spring steel, leather
Including scabbard
Hardness: 48-50 HRC
Pommel: riveted
Each sword has been thoroughly tested and therefore regularly shows a trace of impact.
Length: 110 cm
Blade length: 81 cm
Blade width: max. 5 cm
Edge: 3 mm (blunt)
Tang construction: full tang
Pommel: screwed
Weight: 1.4 kg
Based on a historical original
Shipment weight (g): 3000 *
We do not sell this product to customers under the age of 18. Click here for more information on the European arms acts.
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
Prevent rust and corrosion by oiling your weapons regularly. Remove rust easily with black sandpaper. Remove burrs with a whetstone. Make sure you have removed all burrs before using a battle-ready weapon, as they can cause wounds.
Tip: How to adjust the finish of your armour and weaponry
Luxurious (polished)- polish the steel with metal polish or toothpaste. You can even give the item a mirror-like polish. Test on a small surface first!
Handmade (matte)- soak the steel in cola for 40 minutes to 20 hours. Check regularly and treat with black sandpaper.
Antique (patinated) leave the steel to rust for some time in a damp environment, preferably outside. Remove the red layer of rust, to reveal the corroded top layer.
Please note. After finishing the product yourself, the warranty and return right expire. Celtic WebMerchant is not responsible for the obtained result."
Packaged with 100% recycled material
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.
