Product description
This imposing spearhead is made of hardened EN45 carbon steel and is suitable for the Viking Age and the Middle Ages (10th/11th century - Type K/M according to Petersen). It has a length of about 52 cm (20.5 in) and cutting edges of about 29 cm (11.4 in). The blade is strongly tapered, from a broad base to a long, narrow point, and is reinforced with a prominent, raised rim along the center for extra strength and piercing ability. Using two pre-drilled holes, the spearhead can be attached to a wooden shaft of your choice, allowing you to create your own Viking or early medieval spear. Shaft and additional mounting material are not included.
_x000D_
Details:
Material: tempered EN45 spring steel (high carbon steel, not stainless)
Overall length (incl. socket): approx. 52.3 cm
Edge: semi-sharp (1 mm), not suitable for battles
Blade length: approx. 37 cm (edges approx. 29 cm)
Max. blade width: approx. 7 cm
Blade thickness: approx. 5 mm
Length of socket: approx. 15.3 cm
Inner diameter of socket: approx. 2.6 cm
Weight: approx. 570 g
Based on a historical original
Shipment weight (g): 600 *
_x000D_
We do not sell this product to customers under the age of 18. Click here for more information on the European arms acts.
_x000D_
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
_x000D_
Prevent rust and corrosion by oiling your weapons regularly. Remove rust easily with black sandpaper. Remove burrs with a whetstone. Make sure you have removed all burrs before using a battle-ready weapon, as they can cause wounds.
_x000D__x000D_ _x000D__x000D_
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.
Read here about how we are committed to sustainability.
