Product description
Around the beginning of the 15th century, mitten gauntlets developed. In gauntlets, the fingers were protected by small pieces of steel. These were considerably weaker than larger steel plates that protect all fingers at once. Therefore, in the first half of the 15th century, mitten gauntlets became increasingly popular. Mitten gauntlets like these are part of, among others, the Avant harness. These mitten gauntlets are supplied without an inner glove. With a steel thickness of 1.6 mm, they are ideal for reenactment.
Details:
Material: steel, leather
Thickness: 1.6 mm
Excluding inner gloves
Based on a historical original
Shipment weight (g): 2000 *
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
Maintenance & care
Prevent rust and corrosion by oiling your armour regularly. Remove rust easily with black sandpaper.
Tip: How to adjust the finish of your armour and weaponry
Luxurious (polished)- polish the steel with metal polish or toothpaste. You can even give the item a mirror-like polish. Test on a small surface first!
Handmade (matte)- soak the steel in cola for 40 minutes to 20 hours. Check regularly and treat with black sandpaper.
Antique (patinated) leave the steel to rust for some time in a damp environment, preferably outside. Remove the red layer of rust, to reveal the corroded top layer.
Please note. After finishing the product yourself, the warranty and return right expire. Celtic WebMerchant is not responsible for the obtained result."
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.
Read here about how we are committed to sustainability.
